Wednesday, April 16, 2008

Smelling Silk and Roses

I love the smell of silk, but when sewing, as in life, there is always a temptation to cut corners. To jump past the details of accomplishment and go for the results. I suppose there are times when it makes sense to do this, but when we stop and take the time to contemplate each step along the way, new discoveries and a better garment is made.

Take this fabulous piece of silk pique fabric screaming to be made into a very in-style shift for Summer 2008. It is silk. It is black and white. I will want it to stay a crisp black and white. I will most likely dry clean it. I could skip the pre-wash and dive right into cutting and sewing, but there may also be the day when I will want to retire it from dry cleaning bills. What did I discover as it was drying from the pre-wash I almost bypassed?

The print runs along the bias. The interval is wider when viewing along its length than when viewing along its width. Convention and sewing pattern instructions tell us to cut it lengthwise, with the grain. Had I not stopped and viewed the fabric while hanging on a clothesline, I would have labored over the lengthwise pattern that could never fit properly within the princess lines of the shift I plan to make. [Note for the future: Hang all prints and view them from different directions and study how they will best work with the garment design.]

When cut on the cross grain the narrower repeat of the pattern fits perfectly between the center front seams. The position of the bold print running from neckline to hem at the center front is key to its use.
Cutting along the cross grain also lends itself to a couture trick of using the muslin made to fit the pattern as the pattern itself.

The muslin is a rough draft of the garment. It is not meant to be finished. Its primary purpose is to test the design and fit of the garment. Key fit points are marked on the muslin from the body and replace those of the pattern from which the muslin was cut.

In this case, the hip line is a very special demarcation. Above the hip, the seams of the garment are curved to the shape of the body. Below the hip, the seams are straight. that means they can be eliminated from the final garment and the print can run continuously around.

After fitting, the left side seam is opened, but all other seams are left intact below the hip line. Above the hip line, the seams become darts. The muslin pattern is laid on the fabric. When translated flat it looks something like a map that has been cut from a globe.

What had been a 4-piece pattern, with 7-distinct fabric pieces to sew together, is now a 1 piece pattern, with 1-seam and 5 darts. The print will run with interruption only on the left side seam from below the hip-line. The print is matched as well as it can be. As an added bonus, about 1/2 yard less fabric is required to make the garment than had it been cut with the lengthwise grain.

4 comments:

  1. What a great post with wonderful detail about how to adapt the layout to accommodate the print using the muslin. So basic, but things that it is all to easy to forget. The pictures are informative and inspiring as they remind me of the fun parts of planning and layout before making a garment.

    ReplyDelete
  2. Great, great post and what good ideas! It's so nice to see them in action, and I love your finished dress!

    ReplyDelete
  3. Your dress looks lovely. Thank you for this informative post.

    ReplyDelete
  4. Thank you for sharing the detail on using the muslin as your pattern. I am guilty of transferring my fitting corrections back to the pattern rather than saving the muslin. I am making a prom dress for daughter out of silk dupioni and doing a muslin first. I am going to use the muslin to cut the silk instead.

    You know I couldn't understand the issue with the print until I saw the photo of it being cut and the finished dress. The print is large and I didn't see that in the smaller photos. When I saw the finished dress photo is when the light bulb went off!

    ReplyDelete